Our Lady of the Rosary Church benefits from new sound system

17-11-rks

Located in Flintshire, near to the border with the neighbouring county of Cheshire, this modern Roman Catholic church now benefits from a new sound system designed, installed and commissioned in September 2026 by the team at Richard King Systems, Wrexham.

While the church is relatively new, being under thirty years old, the speech reproduction of the original sound system was seriously lacking in terms of both fidelity and evenness of coverage.

An additional and significant contributory factor in the difficulty of hearing the spoken word, immediately identified by Richard King Systems at their initial meeting in the church, was the very long reverberation times. Therefore, part of the recommended improvements put forward to the church was that the first stage should be to improve the acoustic environment.

As a result, a suggested scheme for the introduction of sound absorption panels was prepared for the church, with specialist input from the UK panel manufacturer SoundSorb of High Wycombe.

17-11-rks-2

With such a long reverberation time of around 8 seconds the panel scheme was calculated to reduce the reverberation time down to circa 2.8 seconds. While a recommendation within the British Standard 8233:1999 is for a reverberation time of 1.0-1.6 seconds (speech/music) at 500Hz, an appropriate balance between speech intelligibility and choir singing was factored into the design.

The requirements of the British Standard are based on 500Hz which act as a pivotal point for speech intelligibility. Other guides such as the Building Bulletin 93 (primarily for education buildings) use an average of the frequencies in the 500Hz to 2,000Hz range to determine speech intelligibility.

The panel colour was selected to match the existing interior and installed to blend with the lines of the building. In acoustic terms the improvement in speech intelligibility was marked, even with the original sound system still in use.

Following on from the acoustic panel installation, attention then moved to the second stage of improvements – the sound system. As part of the process to ensure the church’s investment met their needs, the initial consultation was followed up with a presentation of the suggested scheme and subsequently a question and answer meeting with a representative group of the church. The system design included:

  • Ease of use – provided by digital automatic microphone mixing
  • High quality and evenly spread sound from premium quality column loudspeakers
  • Fine tuning of the sound to the room acoustics for optimum performance – possible with the state of art processor
  • High quality microphones to best capture the spoken word
17-11-rks-3

To complete the modernisation of the sound a professional Bluetooth® receiver was included.

Following commissioning, comprehensive user awareness was provided by Richard King Systems’ sound engineers to support the church in best harnessing the full capabilities of the new system.

While this particular project was near to their base in Wrexham, Richard King Systems provide sound and audio visual services across England and Wales. With over 35 years of experience – including cathedral work, new build, consultancy and a substantial portfolio of successful projects – they are well placed to support customers in harnessing the power of 21st century technology.

For the latest up-to-date information contact Richard King Systems with your requirements.

For further information visit richardkingsystems.co.uk

VISIT OUR ASSOCIATED SITES

VISIT OUR ASSOCIATED SITES (1) VISIT OUR ASSOCIATED SITES (2) VISIT OUR ASSOCIATED SITES (3)